1. Visual & Safety Pre-Check
- Review previous inspection logs and maintenance status.
- Inspect surrounding area for operational hazards or obstructions.
- Verify operator certification and required PPE compliance.
- Ensure lockout/tagout is disabled before startup.
2. Diesel Engine System Review
- Check engine oil level, air and fuel filters, and coolant.
- Start engine; listen for irregular sounds or smoke.
- Check throttle response and idle stability.
- Inspect fuel lines and connections for leaks.
3. Forks & Mast Inspection
- Inspect forks for bends, cracks, or excessive wear.
- Verify mast operation (lift/tilt/side shift).
- Lubricate mast chains and check for even tension.
- Ensure locking pins and clips are secure.
4. Hydraulic System Check
- Inspect hydraulic hoses and fittings for leaks or damage.
- Check hydraulic fluid level and reservoir clarity.
- Test lift and tilt performance under low load.
- Monitor mast vibration or irregular operation.
5. Safety Equipment & Control Systems
- Test horn, lights, backup alarm, and fire extinguisher.
- Inspect operator compartment, seatbelt, and overhead guard.
- Test service brake and parking brake functionality.
- Verify readability of load capacity plate.
6. Final Checks & Reporting
- Record inspection outcomes on Oxmaint checklist platform.
- Flag defective items for repair scheduling.
- Submit report with technician name, date, and forklift ID.
- Confirm compliance with OSHA 1910.178(q)(7) daily check mandates.